How to install peel and stick Wallpaper?

Peel and stick wallpaper is a great DIY option for adding a fresh new look to your walls. Here are the steps for installing peel and stick wallpaper:

 1.Preparing the Surface: Clean the wall thoroughly to make sure it's free of dust, grease, or any other debris. Fill any holes or cracks with spackling compound and sand the surface smooth.

 2.Measuring the Wall: Measure the height and width of the wall to determine how much wallpaper you will need. Don't forget to add a little extra to account for any cuts or mistakes.

 3.Cutting the Wallpaper: Cut the wallpaper to the right size, allowing for a little extra on each end to account for any mistakes or irregular edges.

4.Peeling and Sticking: Start by peeling the backing off a small portion of the wallpaper, about 6 to 8 inches. Line up the top edge of the wallpaper with the ceiling, and smooth out any air bubbles as you go. Repeat this process until the entire wall is covered.

 5.Trimming the Edges: Use a sharp utility knife to trim off any excess wallpaper along the edges of the wall, doors, or windows.

6.Finishing Touches: Use a seam roller or your hand to press down on the seams and edges of the wallpaper to make sure it's securely attached.

And that's it! With these simple steps, you'll have a fresh, new look for your room in no time.